• Direct Drive Spindles
• Belt Spindles
• Motorized Spindles
• Turning Spindles
• Turning Spindles
  (Built-in Motor)
• Gear Spindles

Turning Spindles

Spindle Characteristic

Specification

Turning Spindle (Built-in Motor)

» Home > Products List > Turning Spindles (Built-in Motor) > Specification

Turning Spindles (Built-in Motor) - Specification

REA501

Name A2-5 Max Speed 6000 rpm Tool Holder A2-5 Bearings 7016x3列+7013x2列 (25º) Bearing Lub. Grease Preload Position Preload Temp. Rise Within Room Temperature +18º Drive By Built-in (180x110x180) Orientation Encoder (HEIDENHAIN ERM280) Taper Deflection 0.002 mm Tast Bar Deflection 0.003 mm Deflection at 300mm 0.0010 mm

Balance Grade G1 (ISO1940) Front Cover Plating Plating Chromium Assemble Type Horizontal Weight About 300 kg Hydraulic Cylinder Strong (M11036) Power Chunk Strong (N-206A5) Spindle Taper MT6 Throu. Dia. ø44 Cooling Requirement 3000 kcal/h Axial Stiffness More Than 20 kg/um Radial Stiffness More Than 9 kg/um Inertia of Rotor 0.0442 kgm²

REA505

Name A2-5 Max Speed 6000 rpm Tool Holder A2-5 Bearings 7016x3列+7012x2列 (25º) Bearing Lub. Grease Preload Position Preload Temp. Rise Within Room Temperature +18º Drive By Built-in (160x110x220) Orientation Encoder (HEIDENHAIN ERM280) Taper Deflection 0.002 mm Tast Bar Deflection 0.003 mm Deflection at 300mm 0.0010 mm

Balance Grade G1 (ISO1940) Front Cover Plating Plating Chromium Assemble Type Horizontal Weight About 300 kg Hydraulic Cylinder Strong (M11036) Power Chunk Strong (N-206A5) Spindle Taper MT6 Throu. Dia. ø42.5 Cooling Requirement 3000 kcal/h Axial Stiffness More Than 20 kg/um Radial Stiffness More Than 9 kg/um

REA601

Name A2-6 Max Speed 4000 rpm Tool Holder A2-6 Bearings 7024x3列(25º)+NN3020x1列 Bearing Lub. Grease Preload Position Preload Temp. Rise Within Room Temperature +18º Drive By Built-in α 180L/6000iB (FANUC) Orientation Encoder T401 (FANUC) Taper Deflection 0.002 mm

Tast Bar Deflection 0.003 mm Deflection at 300mm 0.0010 mm Balance Grade G1 (ISO1940) Front Cover Plating Plating Chromium Assemble Type Horizontal Weight About 400 kg Hydraulic Cylinder Strong (M1552) Power Chunk Strong (N-210A6) Spindle Taper 1/20 Throu. Dia. ø61 Cooling Requirement 4500 kcal/h

REA801

Name A2-8 Max Speed 4000 rpm Tool Holder A2-8 Bearings 140BER10Sx3列 +L115x1列 Bearing Lub. Grease Preload Position Preload Temp. Rise Within Room Temperature +18º Drive By Built-in α 200L/6000iB (FANUC) Orientation Encoder α iCZ A860- 2161-T511 Taper Deflection 0.002 mm

Tast Bar Deflection 0.003 mm Deflection at 300mm 0.0010 mm Balance Grade G1 (ISO1940) Front Cover Plating Plating Chromium Assemble Type Horizontal Weight About 350 kg Hydraulic Cylinder Strong (M1875) Power Chunk Strong (N-212A8) Spindle Taper 1/20 Throu. Dia. ø91 Cooling Requirement 4500 kcal/h

- Page Top -